batte melt pump
Batte > News >

Prevention of adverse effects of mesh screen changer on extrusion molding

The screen changer (filter) is an automatic switching device consisting of one or more filters, which is used to filter out the particles and impurities contained in the plasticized material flow filter. The filter screen is supported by an alloy porous plate or wire mesh. The porous plate or wire mesh is installed on the carrier of the filter. The carrier is driven by hydraulic cylinder to switch between the working position of a system and the off-line non-working position. The filter screen o

Mesh screen changer for plastic production line

Application area of screen changer It is used for melt filter screen changer in plastics, rubber, chemical fiber and ceramics extrusion production line. These switchers - from low-cost manual switchers to highly complex non-stop voltage regulated automatic switchers, are suitable for extruders with screw diameters of 35 mm to 300 mm. The net changer is often used in the following production lines: 1. from plastic resin synthesis reaction device to bulk granular extrusion granulating production l

The structure of the screen changer and the choice of control system

Structure of screen changer In order to ensure the filtering effect, the screen changer is generally composed of three parts: support plate (shunt plate), auxiliary plate and filter screen, and the filter screen is generally made of metal woven mesh. But sometimes for special needs, silk screen and sand filtration are used as polyester. Nylon is coated with sand to remove gel and impurities. In order to increase filtering face and improve filtering capacity, plug-in filters have been developed b

batte Screen changer for extruder

Single plate and double plate, single and double column hydraulic screen changer , quick screen changing, easy operation and maintenance. With built-in sealing device, the sealing performance is good, which can meet the production of arbitrary polymer high extrusion capacity, and can be used with different standard extruders. The time for fast changing the network is less than 2 seconds, and the filter area is selected between 30mm- and 250mm. High abrasion resistance, high pressure resistance a

All kinds of materials used in the production of screen changer

1. In order to maximize production capacity, reduce costs, improve efficiency, increase benefits and maximize profits, it is necessary to adopt non-stop network screen changer in the use of recycled materials and corner materials. 2. The use of mesh screen changer in the production of new materials can increase the plasticity and homogeneity of melt, and it is also a necessary guarantee for the quality of products. Although there are almost no impurities in the new materials, in the actual produ


Chat live
Fax:+86 371-67993277
Tel: +86 371-67991755
Sales direct: +86 15838331071
E-mail:sales@battemachinery.com
http://www.screen-changer.org
24h services
batte melt pump

More about screen changer products:

Backflush extrusion screen chan

hydraulic double plate continuo

hydraulic continuous double pla

Double plate screen changer

batte extrusion melt filter


©2019 Batte Mechanical Zhengzhou Co,.Ltd. All rights reserved. sales@battemachinery.com
Batte is a professional screen changer manufacturer, supplying screen changer, especially screen changer for extrusion mould